Search Ti At Www.rfstariot.com

Wireless Serial UART RS02A1-B Chip BLE5.0 Module RSBRS02ABRI
RSBRS02ABRI aims at cost-effective and high-performance applications. It is a Bluetooth v5.0 low energy module with 2 Mbps data rate supported. The special peripherals of 7816 T-0 and infra-red enable the module applied in remote control and contact IC card. Start your product development with RSBRS02ABRI BLE5.0 serial UART module.
- Module Uart
- Slave Module
- Uart Serial Port
- Serial Uart Module
- Uart Serial Communication
- Bluetooth 5 Modules
view detail
Low-Power ESP32-C3 2.4 GHz WiFi & Bluetooth 5.0 Combo Module RF-WM-C3B1
RF-WM-C3B1, integrated on Espressif ESP32-C3FN4 SoC, is a low-power and highly-integrated Wi-Fi+Bluetooth 5.0 Low Energy (BLE) module. It supports IEEE 802.11b/g/n (2.4 GHz Wi-Fi) and Bluetooth 5.0, well-suiting for mobile devices, wearable electronics and IoT applications.
- Wifi Bluetooth Combo Module
- Wifi Bt Combo Module
- ESP32-C3
- Esp32 Mqtt
- Modul Bluetooth 5.0
- Wifi Bluetooth
view detail
CC1310 Sub-1G Module Supporting 868 MHz & 915 MHz RF-SM-1077B1
RF-SM-1077B1 is a CC1310 module working under the sub-1GHz frequency supporting 868MHz and 915MHz. The Sub-1G module is targeted at long range and low power consumption applications. It is widely used in the sensor monitoring market. Choose 868 MHz - 915 MHz transceiver&transmitter RF-SM-1077B1 to simplify your end devices.
- CC1310 Module
- 868Mhz Module
- Sub-1G Module
- 915 Mhz Transceiver Module
- 915 Mhz Transmitter
- 868Mhz Transceiver
- CC1310
view detail
CC1310 Sub-1G Module 433 MHz & 470 MHz Range RF-SM-1077B2
RF-SM-1077B2 is a sub 1GHz module working under the 433 MHz frequency. The Sub-1G module is aimed at power-supplied applications with long-range and low power consumption requirements. It is widely used in the sensor monitoring market. Choose CC1310 433 MHz transmitter and transeciver to simplify your monitoring devices.
- Sub 1 Ghz Module
- Receiver 433 Mhz
- 433 Mhz Transmitter
- 433 Mhz Transceiver
view detail
CC1312R Sub-1G Module Supporting 868 MHz 915 MHz 920 MHz RF-SM-1277B1
RF-SM-1277B1 is a Sub-1GHz module working under the 779 MHz ~ 930 MHz frequency, especially recognized for 868 MHz 915 MHz transmitter and transceiver. It is widely used in high requireents with the long range transmission and low power consumption. RF-SM-1277B1 will be a good choice to be inserted in your end devices.
- CC1312R Module
- CC1312
- 868 MHz Transceiver
- 915 MHz Transmitter
- 915 MHz Transmitter and Receiver
view detail
CC1312R Module Supporting 433 MHz 450 MHz RF-SM-1277B2
RF-SM-1277B2 is a Sub-1G module working under the 431 MHz ~ 537 MHz frequency. The CC1312R module can be used in the sensoring market. Choose RF-SM-1277B2 to enhance the transmission distance and ease the design of the end products.
- 433 MHz Transeiver
- 450 Mhz Frequency
view detail
CC1352P Multiprotocol and Multi-band Sub-1 GHz and 2.4-GHz Wireless Module RF-TI1352P1
RF-TI1352P1 is a multiprotocol and multi-band Sub-1 GHz and 2.4-GHz wireless module based on CC1352P and designed for the advanced IoT markets. The CC1352P module with power amplifier supports concurrent multiprotocol operation through the DMM driver. RF-TI1352P1 can optimize your design and applications.
- ZigBee Module
- 2.4 GHz Module
- Cc1352p
- Sub 1GHz
- Multiprotocol Module
- Power Amplifier Module
view detail
CC1352R Multiprotocol Sub-1 GHz and 2.4-GHz Wireless Module RF-TI1352B1
RF-TI1352B1, based on CC1352R, is a multiprotocol and multi-band Sub-1 GHz and 2.4-GHz wireless module aimed at the low-power wireless communication and advanced sensing IoT markets. RF-TI1352B1 with two bands antenna output will be a nice choice to simplify your design work.
- CC1352R
- CC1352R module
- Sub 1 Ghz
- Wi-SUN Module
view detail
CC1352P7 Multiprotocol Sub-1 GHz and 2.4-GHz Wireless Module RF-TI1352P2
RF-TI1352P2, based on CC1352P7, is a multiprotocol and multi-band Sub-1 GHz (800 MHz ～ 928 MHz) and 2.4-GHz wireless module aimed at the low-power wireless communication and advanced sensing IoT markets. RF-TI1352P2 with two bands antenna output will be a nice choice to simplify your design work.
- Cc1352p7
- Transceiver 2.4 Ghz
- 868 Mhz Band
- 915 Mhz Band
view detail

ti